Developed specifically for use in bathrooms,
wetrooms and similar wet areas, Tilesure is
comprised of a 1.4mm butyl-based membrane,
with a copolymer top layer, which provides
an excellent surface for the adhesion of
natural stone, porcelain and ceramic tiles.
membrane is quick and easy to apply,
providing a consistent waterproof layer,
guaranteed not to leak. Tilesure also acts
as a decoupling membrane by uncoupling the
floor tiles and accommodating movement in
the substrate, within a thickness of only
1.4mm. This omits the requirement for a
traditional decoupling mat.
provides an effective barrier to the
transition of water vapour.
Under tile heating and
Although a tiled floor can look a
million dollars, tiles are cold to walk on which can make
them unpleasant - especially during the colder months.
However, this need not be an issue with the simple addition
of an under-tile heating mat.
Under-tile heating is not quite the
same as under-floor heating as its function is to warm the
tiles rather than heat the entire room. A warm tiled floor
will of course add warmth to the room but not like a full
under-floor heating system.
An under-tile heating mat installs
directly under the tile within the adhesive layer placing it
in close proximity to the tanking membrane. For this reason
there is a limit to how powerful the heating effect can be.
Too hot and you risk melting the membrane.
Happily, the TILESURE membrane
outperforms all of its contemporaries (including its
predecessor TILESAFE) being able to comfortably handle a
heating mat with an output of 150 Watts per square metre -
over 33% better.
Warming a tiled floor enhances the
ambience of your shower room or bathroom. A warm floor is
not only wonderful to walk on with bare feet, the heat also
speeds up the floor's drying time which improves safety and
prevents dampness and odours associated with the growth of
TILESURE is a premium
product that has undergone extensive testing
and is backed by guarantee. DO NOT be
persuaded that other cheaper products
will work just as well - they are cheaper
for a reason!
You should not be able
to buy TILESURE at a lower price anywhere.
If you are offered something that looks like
TILESURE at a cheaper price it is likely to
be a fake product and may not perform.
Reports of alleged fake products are
investigated. Please let us know if you are
Consider, do you want
to risk using a second rate or fake product?
Catastrophic failure can only be discovered
after an installation is finished. If your
creation fails because the
product simply doesn't perform your only
option is to destroy and start again.
A job done properly
only needs to be done once. Don't risk it - it's not
Insist on TILESURE and be sure!